Submissions

This journal is not accepting submissions at this time.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • The submission file is in OpenOffice, Microsoft Word, or RTF document file format.
  • Where available, URLs for the references have been provided.
  • The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  • The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.

Author guidelines

Recommendations to authors

Recommendations about the first version
For the first version, the corresponding author sends the editing office of the Revue forestière française the project under the form of a digital file, with numbered pages and lines. The text is in French (the Revue exclusively publishes texts in this language). It should be of the best possible quality, in style as well as in content, which means that it should have been previously read by several people and by all authors when it is a collective work.

The articles have to be clear and concise. Their form and length are variable depending on the subject, according to the following framework: if the articles are only made of text, they should not be more than 40,000 characters long, spaces included, apart from exceptional cases. We can consider that an illustration is worth 1,000 to 4,000 characters depending on its weight. Thus, an article of 20,000 characters (spaces included) and 5 medium-sized illustrations of half a page each is the equivalent of 30,000 characters and can be considered as a reference. Nevertheless, articles beyond this classical form can be received if the article is deemed of interest at the moment and of good quality for the readership of the Revue.

TITLE OF THE ARTICLE AND AUTHOR(S)
The title should be both short and explicit for readers who are not necessarily specialists of the subject addressed in the article. The Revue may modify it to improve clarity for its readership.

The first page will contain the title of the article and the names of all authors. Each author will be clearly identified́ by their name, first name, grade, institution (potentially), full postal address and e-mail address. Moreover, affiliations will be mentioned and will have to comply with current standards. The corresponding author will be clearly mentioned if s/he is not the person who sends the project or the first author.

The authors who have an ORCID identifier will mention it.

ABSTRACT
An abstract in French, five to ten lines long maximum (100 words) will be sent along with the article. Its translation into English can be sent too, knowing that the Revue will have it translated by default.

KEYWORDS
Three to 5 keywords will be provided by the authors.

HIGHLIGHTS

Two to 3 highlights will be provided by the authors.

PRESENTATION OF THE TEXT, FOOTNOTES AND ANNEXES
The text itself is written in size 12 characters, with 1.5 line spacing, to make it easy to read and allow for annotations.

It is structured in parts and sections logically embedded within or linked with one another, temporarily numbered under decimal form to avoid any ambiguitý, e.g., 1, 1.1, 1.2, ...

It is made understandable for all readers: acronyms, specialised technical terms, unusual units of measurements unlikely to be readily understood by the readers will be avoided as much as possible. If they turn out to be really handy or indispensable, they will be made clearly explicit when they are first used.

Although mathematical formulas may facilitate the understanding of certain arguments and results, their use should remain limited.

Footnotes will be scarce, concise, and numbered in a continuous manner throughout the article. Large-sized notes will appear as insets.

An annex can prove useful in certain very particular cases. It will have to be short.

PRESENTATION OF THE REFERENCES
References do not play the same role in a scientific and technical article as in a purely scientific article: too long lists of references should be avoided, as well as too many references of articles written in English, to stick to essential references really likely to be of interest to forest managers.

The editors selected APA style (Canadian French) as a model, which can be found in the main reference management software programs (e.g., EndNote, Zotero, Mendeley).

References will have to appear in the text as follows: one author (Barthod, 2010); two authors (Robert et Servain, 2019); three authors and more (Lebourgeois et al., 2019). The detailed references are given at the end of the text, under the following forms:

Articles:
Lebourgeois, F., Lorentz, S., Cousseau, G., & Fenaux, L. (2019). Effet de la chalarose (
Hymenoscyphus fraxineus) sur la croissance radiale du Frêne et sur son déterminisme climatique dans le nord de la France. Revue forestière française, LXXI (3), 225-248. https://doi.org/10.4267/2042/70703 (the DOI is optional).

Books or reports:
Guillard, J. (2017).
Au service des forêts tropicales. Histoire des services forestiers français d’outre-mer. 1896-1960. Nancy : AgroParisTech. Tome 4 : 512 p. (optional: DOI or internet link and consultation date).

Book chapters or communications:
Barthod, C. (2010). L’homme, la nature et la forêt : les grands débats d’idées en cours.
In : Gérer la forêt des deux côtés de l’Atlantique. Divergence et convergence de la foresterie européenne et américaine. Actes du colloque international, Nancy, mars 2005 et Grey Towers, Milford, Pennsylvanie, juin 2005. Nancy : AgroParisTech, 146-159.

ILLUSTRATIONS
Illustrations are welcome when they come in reasonable numbers. They include tables, figures, photographs. They are accompanied by a sufficiently explicit legend and numbered separately in each of the three categories. They are signaled in the text. Colour illustrations are accepted.

If the illustrations are not those of the authors and are submitted to copyright, the authors will have to send the corresponding copyright authorisations.

The Revue forestière française does not take charge of potential copyrights.

  • Tables

Their number and size is indicated, and they are preferentially presented in portrait layout.

They will be sent as word or excel files.

  • Figures

Figures include charts, drawings, maps, graphs. They should not be redundant with tables. They are preferred to tables when they present the same data without excessive complexitý. They are clear enough to remain perfectly legible following down-sizing.

  • Photographs

Photographs are sent in black and white or in colour. The board of editors may decide to publish photographs in black and white if necessary.

Recommendations relative to the final version

The final version will be transmitted under the form of digital files:

  • a full pdf version of the article;

  • a ‘separate files’ version as follows:

  • the text in a word file,

  • the tables in word or excel files,

  • the figures in excel or jpg files, the maps in jpg files with at least 300 dpi resolution,

  • the photographs in jpg files with at least 300 dpi resolution.

All the files sent by the authors will have to be easily adaptable to the draft constraints of the Revue to allow laying out illustrations under its final format.

Privacy Statement

Confidentiality policy: protection of personal data

Within the framework of the provision of a free online service and of the implementation of the present regulations, the publisher – as the person responsible for data treatment – and the website host – as a subcontractor – commit to abide by the current regulations applicable to the treatment of personal data, as stated in EU Rule 2016/679 of the European Parliament and in the Council Rule of 27 April 2016 relative to the protection of natural persons as regards the treatment of personal data and the free movement of personal data, modified law n° 78-17 of 6 January 1978 relative to information technology, files and liberties and law n° 2018-493 of 20 June 2018 relative the protection of personal data.

As a service provider, the publisher is responsible for the treatment of the personal data collected within the framework of the implementation of the present contract. In this context, several end-user categories (roles) can be distinguished:

  • The manager of the journal supervises the technical parametrisation of the website and is in charge of the editorial responsibility of the Revue. He can identify the roles of the registered end-users.

  • The editor-in-chief is responsible for the scientific aspect of the Revue.

  • The authors are the people at the origin of the works published on the website, and have intellectual property rights on these works.

Registered users may have one or several concomitant roles, assigned by the managers of the Revue or the editor-in-chief.

Personal data of all registered users (who have created an account):

  • App identifier*

  • Password*

  • First name*

  • Family name*

  • Affiliation*

  • Signature

  • E-mail address*

  • URL

  • Telephone

  • Postal address

  • Working languages

  • ORCID identifier

  • Country*

  • Biographical note (e.g., department and position, address)

  • Interests (for evaluations)

  • Role (reader, manager, author, editor-in-chief)

The account is created based on the user’s consent, who freely decides to register his data with the website to the ends defined by his role.
If an account remains inactive for more than 24 months, the people in charge of the Revue will close the account and delete all the related personal data, except the accounts registered under the author role when the authors have published works.
 

Data of unregistered users who wish to receive e-mails about new contents:

Data about the contributors provided before publishing an article:

  • First name*

  • Public name (wished for)

  • Family name*

  • E-mail address*

  • ORCID identifier

  • URL

  • Affiliation

  • Country*

  • Biographical note (e.g., department and position, address)

It is up to the user-author or user-manager to collect the consent of the potential contributors to the work in order about recording the above-mentioned data in the website. The authors’ personal data are solely collected for publication, referencing and indexing of the author(s)’ contributions, as commonly done in bibliographical referencing.

They are kept as long as the work remains published. Removal of a work by an author deletes the corresponding data about the work.

Some data are publicly visible (first name, second name, family name, main author’s e-mail address, ORCID identifier, URL, affiliation, country, biographical note); the other data are only accessible to the previously mentioned people in charge of data treatment.

By uploading a work on the website, the authors recognise that data mining by search engines on the internet – specialised or not in indexing open archives or bibliographical databases – will be likely to make their bibliographical data visible, and they agree to this use.
The end-users who visit the website without creating an account will not be the object of any data treatment. The user may fill a contact form, or file a request for a copy and an RSS feed. In this case, the data provided by the user are only used to respond to their request and are not used for any other purpose. These data are only kept long enough for the request to be treated.

For any request aimed at implementing the above-mentioned rights, please write to:
dpo@agroparistech.fr

For any complaint, please send an e-mail directly to the person appointed to data protection in the institution:

dpo@agroparistech.fr

The personal data collected by the publisher will not be the object of a systematised treatment. The publisher may send messages to mailing lists created based on the roles of the registered end-users, use the data for analytical and statistical purposes internal to the Revue to improve its own management and functioning, and for the other purposes mentioned in the present conditions of use.

Cookies

The cookies used on the website are not intended to identify the end-user. They are only used to record the data about their navigation on the website.

Open Journal System uses cookies to manage the user sessions (for which they are required). Cookies are not necessary to simply visit the website and read its content.

The end-user of the website recognises being informed about this practice and authorises it.